Chapter 7: Postinstallation administration
This section covers the following tasks:
●Verifying translations on page 67
●Setting rules for daylight savings time on page 68
●Setting locations (if necessary) on page 69
●Verifying the date and the time (main server only) on page 70
●Clearing and resolving alarms on page 71
●Enabling and disabling the Ethernet switch ports on page 71
●Backing up files to the compact flash media on page 73
●Enabling alarms to INADS by way of a modem on page 72
●Enabling alarms to INADS by way of the SNMP module on page 73
●Before leaving the site on page 74
Verifying translations
1.Open a SAT session on the server.
2.To view all the administered circuit packs in the system, type list configuration all and press Enter.
3.To verify the location of the IPSI circuit packs,type list
For more information, see your planning documents and check the administration status on the following items:
●list station
●list trunk-group
●list hunt-group
Installing and Configuring the Avaya | January 2008 67 |
