13
CHAPTER
3
Managing Units
Introduction
The EmergeTM DM2000 Desktop Manager (Management Appliance) is used to manage networks
of ECMS Receivers and ECMS Transmitters (units). Using the Management Appliance, an
administrator can add units, view and edit unit properties and initiate a variety of other operations.

Accessing the Management Appliance Web Interface

To access the Management Appliance web interface:
1. Open Microsoft® Internet Explorer.
2. In the Address bar, type the url for the Management Appliance. The address will be in the
format http://<addr>> where << addr>> is the IP address assigned to the Management
Appliance LAN port 1.
NOTE: If DNS is enabled the address is the fully qualified host name assigned to the Management Appliance.
3. Press Return. The Management Appliance login screen appears.
4. Enter login user name and password. Defau lt username is ‘admin’. Default password is
‘password’.
NOTE: If you have forgotten your password, contact Avocent Technical Support.

Units View Windows

The Units View windows display the list of units that have been added to the Management
Appliance database.
Units are displayed in a table format with column headings. You can use the checkbox to the left of
each unit name to select/deselect the unit for an operation. To select all the units on a page, click the
checkbox at the left of all the column headings at the top of the list - this is usually to the left of the
Name column. Clicking the Select All checkbox will automatically enable the checkboxes for all
units on that page. To deselect items that were previously selected, click to select the checkbox.
If the list of units spans more than one page, units on subsequent pages will not be selected.