Chapter 3: Managing Units 19
•Name
• Type (ECMS Transmitter, ECMS2000T, or ECMS Receiver, ECMS2000R)
• IP address
• MAC address
• Unit Session Status
The Unit Overview window enables you to:
• Change the name of a unit
• Reboot a unit
• Upgrade the firmware of a unit
To access the Unit Overview window:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the Management Appliance.
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
To change the name of a unit:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the Management Appliance.
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
5. Type a name for the managed unit. (You cannot change the type.)
6. Click Save and then click Close. The Unit All window will open.
Changing Unit Properties
The Management Appliance enables you to manage the following properties for each unit:
• Department
• Location
• Primary contact details (name, telephone number)
To change the properties of a unit:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the Management Appliance.
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
5. Select Properties from the side navigation bar.