35
CHAPTER
5
Advanced Operations

ECMS Transmitter Pooling

The Management Appliance allows you to pool transmitters so that they are accessible to multiple
users. All discovered devices are assigned to a pool of transmitters. When a user logs in at a
receiver that user will connect to the transmitter that has been assigned to them. If no specific
transmitter has been assigned they will then connect to the first available transmitter, assuming
pooling is enabled.
The pool of devices is automatically created and consists of discovered transmitters that are not
specifically assigned to users and not in use in a connection. Each transmitter is assigned based on
the order in which the users log in.
To enable Transmitter pooling:
1. In the Management Appliance, click the System tab.
2. Click EmergeTM Desktop Manager Server.
3. Click Transmitter Pooling in the left navigation pane.
4. Click to select the Enable transmitter pooling.
5. Click Save and then Close.
To disable Transmitter pooling:
1. In the Management Appliance, click the System tab.
2. Click EmergeTM Desktop Manager Server.
3. Click Transmitter Pooling in the left navigation pane.
4. Click to de-select the Enable transmitter pooling.
5. Click Save and then Close.

Backup and Restore

The Management Appliance allows you to back up the database and to store it in a location of your
choice. In addition, you can also restore the database from a file located on any machine accessible
on the LAN on which the Management Appliance is located.