DX-700 • User’s Guide • Rev 02 197
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
DX-700 Remote Command List
SExample: FIBERPCB? | 2 | 1 | 1 | 0
cf_boplcq
Description: Query Fiberlink software version.
Set format: n/a
Query format: FIBERSOFT? | Bank | Out | Index | Type
~Bank: Bank ID 1 – 3
~Out: Output ID 1 – 6
~Index: Fiberlink index (starts from 1; 0 is not supported)
~Type: Fiberlink type (0 = Fiberlink Tx; 1 = Fiberlink Rx)
Query returns: Software Version
SExample: FIBERSOFT? | 2 | 1 | 1 | 0
01.03
cf_bocfoj
Description: Query Fiberlink firmware version.
Set format: n/a
Query format: FIBERFIRM? | Bank | Out | Index | Type
~Bank: Bank ID 1 – 3
~Out: Output ID 1 – 6
~Index: Fiberlink index (starts from 1; 0 is not supported)
~Type: Fiberlink type (0 = Fiberlink Tx; 1 = Fiberlink Rx)
Query returns:
~Case 1 - Firmware Version (if Fiberlink Rx)
~Case 2 – Controller Firmware Version (if Fiberlink1 Tx)
~Case 3 – Controller and Input Firmware Version (if Fiberlink2 Tx)
SExample: FIBERFIRM? | 2 | 1 | 1 | 0
01.00
FIBERFIRM? | 2 | 1 | 1 | 0
01.03.16
FIBERFIRM? | 2 | 1 | 1 | 0
01.05.02 | 00.01.08
cf_booqfjb
Description: Query Fiberlink runtime.
Set format: n/a
Note Depending on the Fiberlink type and version, this command
returns the applicable firmware version.