DX-700 • User’s Guide • Rev 02 47
2. Hardware Orientation
DX-700 Rear Panel
asf=lìíéìí=jçÇìäÉ
The figure below illustrates the DX-700’s DVI Output Module.
Figure 2-8. DX-700 DVI Output Module
1) Thumb Screws
Two captive, spring-loaded Thumb Screws are provided to secure the module
into the DX-700 chassis.
2) Latches
Two Latches are provided to ensure precise module insertion and extraction.
Care is required when inserting or removing modules. Refer to the “Module
Insertion and Extraction” section on page57 for instructions.
3) DVI Outputs
Three DVI-I connectors are provided for DVI Outputs, which connect to existing
(legacy) LED products such as MiPIX and OLite 612. Each output can drive one
attached display from any portion of a selected source image. Each output is
1) Thumb Screws 3) DVI Outputs
2) Latches
LED OUT 1 LED OUT 2 LED OUT 3
2
2
3
1
1