Barco DX-700 - page 56

56 DX-700 • User’s Guide • Rev 02
2. Hardware Orientation
Module Installation and Configuration
•In multi-bank configurations, all banks must be directly adjacent to one another,
with no blank panels in between.
Figure 2-14. Adjacent banks
Blank
Input Input Input
Output
System
Power
Input
Output
Correct Justification Incorrect Justification
Bank 1 Bank 2
Input Input Input
Output
System
Power
Output
Input
Blank
Bank 1 Bank 2
Important With the exception of “spare” modules, if the DX-700
determines that any modules are incorrectly installed (or
missing), a Startup Diagnostic Menu appears which
prompts you to power down the DX-700 and re-configure your
modules properly.
If the above prompt occurs, and provided that a System
Module is properly installed, on the Startup Diagnostic
Menu you will be able to press the {DX-700 Management}
button, and access a subset of management functions. In
Chapter 4, refer to the “Power-Up Initialization” section on
page77 for details.
Important The DX-700 will not recognize modules that are installed to
the left of a blank panel. They will be treated as spares.
Refer to the “Storing Spare Modules” section on page59 for
additional details.
Important Multi-bank configurations are currently not implemented.
Important For proper chassis cooling, slots that do not contain
input or output modules must always have blank panels
installed.