DX-700 • User’s Guide • Rev 02 71
4. Operation
Quick Setup and Operations
11. Run the Input Wizard. Refer to the “Using the Input Wizard” section on page93
for complete instructions.
12. Fine tune your inputs as required. Refer to the “Using the Input Management
Menu” section on page 107 for instructions.
13. Fine tune your displays as required. Refer to the “Using the Display
Management Menu” section on page 124 for instructions.
14. Recall the desired preset, and you’re ready to go. Refer to the “Using the Preset
Management Menu” section on page 103 for instructions.
This completes the “quick setup” procedure.
Important Ensure that you save a system “preset” after you configure
each input.