DX-700 • User’s Guide • Rev 02 49
2. Hardware Orientation
DX-700 Rear Panel
kkf=lìíéìí=jçÇìäÉ
The figure below illustrates the DX-700’s NNI Output Module.
Figure 2-9. DX-700 NNI Output Module
1) Thumb Screws
Two captive, spring-loaded Thumb Screws are provided to secure the module
into the DX-700 chassis.
2) Latches
Two Latches are provided to ensure precise module insertion and extraction.
Care is required when inserting or removing modules. Refer to the “Module
Insertion and Extraction” section on page57 for instructions.
3) NNI Outputs
Three HDMI-type connectors are provided for NNI Outputs, which connect to new
LED products such as NX-4. Each output can drive one attached display from any
portion of a selected source image, and each output is limited to a maximum
resolution of 1024 x 768.
1) Thumb Screws 3) NNI Outputs
2) Latches
LED OUT 1 LED OUT 2 LED OUT 3
2
2
1
1
3