42 DX-700 • User’s Guide • Rev 02
2. Hardware Orientation
DX-700 Rear Panel
The figure below illustrates the DX-700’s universal Input Module.
Figure 2-3. DX-700 Input Module
1) Thumb Screws
Two captive, spring-loaded Thumb Screws are provided to secure the module to
the DX-700 chassis.
2) Latches
Two Latches are provided to ensure precise module insertion and extraction.
Care is required when inserting or removing modules. Refer to the “Module
Insertion and Extraction” section on page57 for instructions.
3) Expansion Out
One DVI-I connector is provided for the EXP OUT (Expansion Out) port, which is
used only with external and cross-bank stacking configurations. The port
connects input modules together, guaranteeing that inputs are identical across
banks or units. Input 1 on the “master” must connect to input 1 on the slave, etc.
1) Thumb Screws 5) HD / SDI Input
2) Latches 6) Component Input
3) Expansion Out 7) DVI / Expansion Input
4) RGBHV Input
EXP OUT DVI / EXP IN
RGBHV
1 - HD/SDI - 2
Y / COMP C / Pb Pr
2
2
6
4
3
5
7
1
1