3. Operation

Menu Structure

sÉêíáÅ~ä=fåíÉêî~ä=pïáíÅÜáåÖ=jÉåì

From the Main Menu, select Vertical Switch to display the Vertical Interval Switching Menu, as illustrated below.

 

 

 

 

 

VERTICAL SWITCHING

 

 

 

> Function

Enabled

 

 

Source

[Ch. 1]

 

 

SYNC

[Valid]

 

 

 

 

 

Figure 3-15.MatrixPRO Vertical Interval Switching Menu

The source for vertical SYNC is hard-set to the channel 1 input. The only function that the user can control is to enable or disable the vertical interval switching. This function can be enabled and disabled in the same manner as the reclocking function.

Status will report a unacceptable or absent input signal as "Invalid," and report an acceptable signal as "Valid." The status of input SYNC will always be reported whether or not the function is enabled.

p~îÉ=mêÉëÉíë=jÉåì

From the Main Menu, select Save to display the Save Presets Menu, as illustrated below.

SAVE

 

> File

1

Figure 3-16.MatrixPRO Save Presets Menu

There are eight machine configuration presets that can be saved.

„To save presets:

1.Press SEL to enter the edit mode (#).

2.Use the selector knob to scroll to the desired file number.

3.Press SEL once more to save the entire machine state as of that moment.

4.Press ESC to exit the edit routine.

5.Press ESC key once more to return to the Main Menu.

26

 

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide

 

Page 36
Image 36
Barco HD/SD-SDI, 16x16, 8x8 manual SÉêíáÅ~ä=fåíÉêî~ä=pïáíÅÜáåÖ=jÉåì, ~îÉ=mêÉëÉíë=jÉåì