_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä

RS-232 Mode

opJOPO=jçÇÉ

The MatrixPRO will respond with a “#” prompt when the command processor is ready for a command. The command syntax is shown below

cmd arg1 arg2 … argn<cr>

Table B-2.RS-232 Command Syntax

Command

Description

cmd

cmd is any valid MatrixPRO command, typically 2 to 6 alphabetic

 

(non numeric) characters

arg

argument1, argument2, … argument"N" are required or optional

 

parameters depending on the command used.

<cr>

carriage return (ASCII 13) terminates the command

Please note:

A space (ASCII 32) must be inserted between the command and any arguments that follow. A space must also be inserted between all argument parameters, except for the last argument in the chain.

All commands in RS-232 mode must be terminated with a carriage return (ASCII 13). The carriage return will tell the command processor to begin execution of the command.

Query commands will return the following:

=result

#

The “=” indicates that a result from a query command is following. The “result” will follow directly after the “=”. The value of the result will vary depending on the query command used. A new line will be generated and the prompt (#) will indicate the system is ready for a new command.

62

 

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide

 

Page 72
Image 72
Barco HD/SD-SDI, 16x16, 8x8 manual OpJOPO=jçÇÉ, Cmd arg1 arg2 … argncr