6. Upgrading Software
Overview
lîÉêîáÉï
The MatrixPRO units built by Barco Folsom incorporate system software in a Flash memory component. Flash memory allows easy software upgrades, without the need to send the unit back to the factory.
The “loader” utility enables you to update the system’s Flash module with the latest revision of software. The utility can be run from a computer with a hard drive (recommended) or a floppy drive. Running the loader from a floppy drive is discouraged due to the slow speeds associated with disk access.
e~êÇï~êÉ=oÉèìáêÉãÉåíë
The following list outlines hardware requirements for upgrading software:
•
•
IBM compatible computer with an available COM port
Serial cable conforming to EIA
Note
This cable is available as an
pçÑíï~êÉ=oÉèìáêÉãÉåíë
The following list outlines software requirements for upgrading software:
•
•
•
Windows® 95/98/NT/2000/XP Flash File Loader MatrixPRO Software files
The Flash File Loader with the Software files can be downloaded from our FTP site as described below.
50 |
| MatrixPRO • 16x16 and 8x8 |
|
