MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide 11
2. Hardware Installation
Power Cord/Line Voltage Selection
mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå
The MatrixPRO 16x Matrix Switcher performs line voltage selection automatically. No user
controls are required for line voltage selection. The AC power cords must be accessible so
that the cords can be removed during field servicing.
Figure 2-3. Tandem Prong-type Plug
Warning When the MatrixPRO 16x16 HD/SDI SDI is used in the 230-
volt mode, a UL listed line cord rated for 250 volts at 15 amps
must be used. This cord will be fitted with a tandem prong-
type plug.
Avertissement La choix de la ligne de voltage se réalise automatiquement
par le MatrixPRO 16x16 HD/SDI SDI Transformateur
Graphique. On n'a pas besoin du controller usager pour la
choix de la ligne de voltage.
Warnung Das MatrixPRO 16x16 HD/SDI SDI -Gerät mu beim Anschlu
an 240V ~ mit einer vom VDE auf 250V/10A geprüften
Netzleitung mit einem Schukostecker ausgestattet sein.