Belkin F1DE116C, F1DE208C, F1DE216C user manual Connecting Computers to the Switch USB Connection

P74290ea_F1DExxxC_man.qxd 30-10-2003 11:20 Page 10

INSTALLATION

2.Using the OmniView ENTERPRISE Quad-Bus Series Dual-Port PS/2 KVM Cable (F1D9400-XX), connect the high-density, 50-pin, SCSI 2-style connector to a free Switch port, starting with the port for the first two computers. (For best results, screw the connectors into the Switch and the computer, when possible.)

Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8

3.Connect the VGA and PS/2 connectors to the computer (make sure that you connect the keyboard and mouse cables to the correct ports on your computer; purple indicates the keyboard connector and green indicates the mouse connector).

Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8

4.Repeat steps 1 through 3 for each additional computer you wish to connect.

INSTALLATION

Connecting Computers to the Switch (USB Connection)

1.Attach the IEC power cable to the power connector located on the rear of the Switch.

Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8

2.Using the OmniView ENTERPRISE Quad-Bus Series Dual-Port USB KVM Cable (F1D9401-XX), connect the high-density, 50-pin, SCSI 2-style connector to a free Switch port, starting with the port for the first two computers. (For best results, screw the connectors into the Switch and the computer, when possible.)

Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8

3.Connect the USB connector of your KVM Cable to the computer. If your computer is running Windows Me or newer, skip to step 6, otherwise continue with step 4.

Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8

10 11