Award BIOS Setup Utility
Super IO Device
Move the cursor to this field and press <Enter>. The following fields will appear
Onboard FDC Controller
Enabled Enables the onboard floppy disk controller
Disabled Disables the onboard floppy disk controller
Onboard Serial Port 1 and Onboard Serial Port 2
Auto The system will automatically select an I/O address for the onboard serial port 1 and serial port 2.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to
manually select an I/O address for the onboard serial port 1 and serial port 2.
Disabled Disables the onboard serial port 1 and/or serial port 2.
SC Port Address/IRQ (PM11-UL/RAMA only)
This field is used to select the SC port’s address and IRQ. When selecting an address for the SC port, the IRQ will at the same time appear next to the address selected.
MS Port Address/IRQ (PM11-UL/RAMA only)
This field is used to select the MS port’s address and IRQ. When selecting an address for the MS port, the IRQ will at the same time appear next to the address selected.
SD Port Address/IRQ (PM11-UL/RAMA only)
This field is used to select the SD port’s address and IRQ. When selecting an address for the SD port, the IRQ will at the same time appear next to the address selected.
Important:
IRQs for Serial Port 1, Serial Port 2, Parallel Port, SC Port, MS Port and SD Port must be appropriately selected making sure each port uses a different IRQ. When selecting a port address for SC Port, MS Port and SD Port, the IRQ will at the same time appear next to the address selected. For example, if you selected “700/3” for the SC port, “700” is the port’s address and “3” is its IRQ. Therefore you must not select IRQ 3 for the other ports.
3
71
