Belkin PM11-EC/RAMA, PM11-EL/RAMA, PM11-UL/RAMA manual Jumper Settings for Clearing Cmos Data

2

Hardware Installation

2.3 Jumper Settings for Clearing CMOS Data

3

2

1

32 Clear

1 CMOS (JP2)

3

2

1

1-2 On: Normal	2-3 On:
(default)	Clear CMOS Data

Clear CMOS Data - Jumper JP2

If you encounter the following,

a)CMOS data becomes corrupted.

b)You forgot the keyboard, supervisor or user password.

c)You are unable to boot-up the computer system because the processor’s ratio/clock was incorrectly set in the BIOS.

you can reconfigure the system with the default values stored in the

ROM BIOS.

To load the default values stored in the ROM BIOS, please follow the steps below.

1.Power-off the system and unplug the power cord.

2.Set JP2 pins 2 and 3 to On. Wait for a few seconds and set JP2 back to its default setting, pins 1 and 2 On.

20