Belkin PM11-EC/RAMA, PM11-EL/RAMA, PM11-UL/RAMA Supported Software Using the DMI Utility, Edit DMI

4

Supported Software

4.1.2 Using the DMI Utility

Award DMI Configuration Utility Copyright Award Software Inc, 1996 [Edit DMI] [Add DMI] [Load DMI File] [Save DMI File]

		BIOS		*** BIOS Auto Detect ***
		System
		Enclosure/Chassis	Type : BIOS Information
		Processor	Handle : 0000	:
		Memory Controller	Vendor Name
		Memory Module	BIOS Version :
		Memory Module	BIOS Starting Address Segment : E000
		Memory Module	BIOS Build Date :
		Memory Module	BIOS Characteristics :
		Cache	Size of BIOS ROM : 0256K
		Cache
		Port Connector
		Port Connector
		Port Connector
		Port Connector
		Port Connector
		Port Connector
		Port Connector
		System Slots
	- ¯ ¬ Move cursor		ENTER-Accept	DEL-Delete ESC-Abort&Exit
®

The four menus located on top of the DMI Configuration Utility screen are Edit DMI, Add DMI, Load DMI File and Save DMI File. Use the

←or → (left or right) arrow keys to select a menu from the Menu

bar.

On the left side of the screen is a list of the system configuration items. Use the ↑ or ↓ (up or down) arrow keys to select an item.

The commands at the bottom of the screen will allow you to navi- gate through the various setup menus.

Edit DMI

1. Use the ← or → arrow keys to select the Edit DMI menu.

2.Highlight the item on the left screen that you would like to edit by using the ↑ or ↓ arrow keys, then press <Enter>.

3.The cursor will move to the screen you select allowing you to edit information.The screen will also display the auto-detected informa- tion.

4.Press <F10> to update the edited information into the flash ROM.

92