Belkin PM11-EL/RAMA manual Award Bios Setup Utility 6 PnP/PCI Configurations, PNP OS Installed

Award BIOS Setup Utility

3.1.6 PnP/PCI Configurations

This section shows how to configure the PCI bus system. It covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Installed			No		Item Help
Reset Configuration Data			Disabled		Menu Level
Resources Controlled By			Auto(ESCD)		Default is Disabled.
X IRQ Resources			Press Enter
					Select Enabled to
PCI/VGA Palette Snoop			Disabled		reset Extended System
					Configuration Data
Assign IRQ For VGA			Enabled
					(ESCD) when you exit
Assign IRQ For USB			Enabled
					Setup if you have
PCI Slot 1 Use IRQ			Auto
					installed a new add-on
PCI Slot 2 Use IRQ			Auto
					and the system
PCI Slot 3 Use IRQ			Auto
					reconfiguration has
					caused such a serious
					conflict that the OS
					cannot boot.
↑↓→←	Move Enter:Select	+/-/PU/PD:Value F10:Save		ESC:Exit F1:General Help
	F5:Previous Values		F6:Fail-Safe Defaults	F7:Optimized Defaults

The settings on the screen are for reference only. Your version may not be identical to this one.

PNP OS Installed

The default setting is “No”. The BIOS will detect the Plug and Play devices for some compatible resources.

Reset Configuration Data

Enabled The BIOS will reset the Extended System Configuration Data (ESCD) once automatically. It will then recreate a new set of configuration data.

Disabled The BIOS will not reset the configuration data.

Resources Controlled By

The Award Plug and Play BIOS has the capability to automatically configure all of the boot and Plug and Play compatible devices.

Auto(ESCD) The system will automatically detect the settings for you.

Manual Choose the specific IRQ resources in the “IRQ Resources” field.

3

81