Black Box FX150A manual Using Single-Frequency Tone Detection

ATDP (phone number) T ,#22,#22,#22,#22

Again, you should consider

whether the call is local or long distance, and what the appropriate access code is for the desired port.

NOTE

If a port access code is changed to a number using various digits (for example, 4598), the caller will use a similar dialing string with # between access codes. Example: ATDT (phone number), #4598,#4598, #4598

LINESHARE PRO

4.13Using Single-Frequency Tone Detection

When the Lineshare Pro answers a call, it listens for specific pre- programmed tones and automatically routes the call to the correct port. If a tone is not present, the call is routed to the primary default port.

The Lineshare Pro listens for the following single-frequency tones:

•1000hz

•1100hz (typically fax CNG tone)

•1200hz

•1300hz

•1400hz

•1500hz

•1600hz

•2225hz (typically reverse modem tone)

The Lineshare Pro is factory-preset to route calls as follows:

•Port 1—1000hz

•Port 2—1600hz

•Port 3—1100hz

•Port 4—2225hz

31