Black Box FX150A manual Lineshare PRO

LINESHARE PRO

NOTE

You must turn Protocol Tone Access Signal Detection ON to route calls to Port 1 and Port 2 using this application. Port 3 and Port 4 are factory- preset ON. See Section 5.5 for more information.

To have the calling party automatically route calls to a port connected to the Lineshare Pro, the caller must use a device that can produce the single-frequency tones.

One device that identifies a modem-type device with a single- frequency tone is called the Lineshare Master (FX155A). The Lineshare Master can produce eight different single-frequency tones that allow the Lineshare Pro to route calls to multiple modem-type devices connected to a single phone line.

When the Lineshare Pro answers a call and detects a single-frequency tone, the call is automatically routed to the correct port.

32