Black Box FX150A manual Volt TelephoneOutlet Wall Jack

LINESHARE PRO

To install the Lineshare Pro on a

single phone line, as shown in Figure

3-3, follow these steps:

•Unplug the telephone cable from the wall jack.

•Plug one end of the telephone cable provided with the Lineshare Pro into the LINE port on the back of the Lineshare Pro. Plug the other end of the cable into the wall jack where the phone was connected.

•Plug the small end of the AC power cord provided with the Lineshare Pro into the power input port labeled 12 VAC on the back of the Lineshare Pro. Plug the AC adapter into a standard AC outlet.

The Lineshare Pro begins a self- check eight (8) seconds after power is applied. When the Lineshare Pro completes its self-check, the green ON/PORT 1 LED remains ON.

NOTE

The line must be installed for the unit to pass the self-test and show proper indication of LED ON/PORT 1 LED.

110 Volt

TelephoneOutlet

Wall Jack

LINE PORT 1 PORT 2 PORT 3 PORT 4

12V AC

Figure 3-3. The Lineshare Pro Installed for a Single-Phone-

Line/Single-Phone Arrangement.

15