Black Box FX150A manual Home Routing, Secured Operation

LINESHARE PRO

factory-preset OFF, 0 0 *. To turn the Extension Detection feature ON, enter the programming mode and press the following on your tone phone:

1 Turn ON

0 Extension Detection

*End programming sequence (3 beeps indicate correct entry)

(Optional entries for additional changes)

*Save changes and exit programming

[1]Home Routing

Home Routing operates only when the Lineshare Pro is configured in the secured mode.

This feature enables the Lineshare Pro to hold the phone line after a device disconnects from a call and then route it to another port, or “home.” Home is a temporary state where the caller must enter an access code, or a single-frequency protocol tone, to access another port.

When a call is rerouted home, the amount of time that the caller has to select another port is limited by the Time at Home function. If the caller does not enter a tone to access another port during this time, the Lineshare Pro disconnects the call.

The Home Routing feature is factory-preset OFF, 0 1 *.

Turn this feature ON if you want to allow access of multiple ports during a single call in the secured mode.

To turn Home Routing ON, enter the programming mode and press the following on your tone phone:

1 Turn ON

1 Home Routing

*End programming sequence (3 beeps indicate correct entry)

(Optional entries for additional changes)

*Save changes and exit programming

[2]Secured Operation

When the Lineshare Pro is in the secured mode, the following features are affected regardless of their programming defaults or current settings:

0 Extension Detection is OFF.

3 No Answer Cascade is OFF.

4 Answer/Disconnect Cascade is OFF.

5 Pulse Transfer is OFF.

6 Open Line Notification is OFF.

7 Inbound Tone Transfer is OFF.

8 Ring Reduction is OFF.

9 Outbound Tone Transfer is OFF.

39