LINESHARE PRO
(For more information about the secured mode, see Section 4.2)
The Secured Operation feature is
To turn Secured Operation ON, enter the programming mode and press the following on your tone phone:
1Turn ON
2Secured Operation
*End programming sequence (3 beeps indicate correct entry)
(Optional entries for additional changes)
*Save changes and exit programming
[3]No Answer Cascade
No Answer Cascade operates only when the Lineshare Pro is configured in the
If an incoming call remains unanswered (on the primary default port) after the Rings Available count expires, the No Answer Cascade feature will automatically route the call to the next port in the Cascade Port Order. This feature can be used for any port. If the last port in the Cascade Port Order does not answer the call, the Lineshare Pro disconnects the call.
The No Answer Cascade feature is
To turn No Answer Cascade OFF, enter the programming mode and press the following on your tone phone:
0 Turn OFF
3 No Answer Cascade
*End programming sequence (3 beeps indicate correct entry)
(Optional entries for additional changes)
*Save changes and exit programming
NOTE
See Cascade Port Order in Section 5.5 for more information.
[4] Answer/Disconnect Cascade
Answer/Disconnect Cascade operates only when the Lineshare Pro is configured in the
If an incoming call is answered from any port and disconnected, the Answer/Disconnect Cascade feature will automatically route the call to the next port in the Cascade Port Order. This feature can be used for all four ports. After the last port in the Cascade Port Order answers a call, the Lineshare Pro disconnects the phone line.
40
