Black Box FX150A manual Keypad # Protocol Tone Access Signal

LINESHARE PRO

Table 5-3. Protocol Tone Access Signal Options.

Keypad #	Protocol Tone Access Signal
0	1000 Hz
1	1100 Hz (typically fax CNG tone)
2	1200 Hz
3	1300 Hz
4	1400 Hz
5	1500 Hz
6	1600 Hz
9	2225 Hz (typically reverse modem tone)

The Protocol Tone Access Signal is factory-preset to 0 6 1 9 *. Protocol tone 0 will access Port 1, protocol tone 6 will access Port 2, protocol tone 1 will access Port 3, and protocol tone 9 will access Port 4.

To change Protocol Tone 4 to access a port, enter the programming mode and press the following on your tone phone:

2 3 Protocol Tone Access Signal

The desired port selection (1-4)

4The desired new Protocol Tone Access Signal

*End programming sequence (3 beeps indicate correct entry)

(Optional entries for additional changes)

*Save changes and exit programming

46