Black Box FX150A manual Lineshare Pro Features

LINESHARE PRO

If the Lineshare Pro does not enter the programming mode (the green LED continues flashing), try again with a different phone.

When you are in the programming mode and entering changes, the Lineshare Pro notifies you of correct or incorrect entries with the following signals:

•Three short beeps: Indicates that the entry is valid, and the Lineshare Pro has accepted the change.

•Single low beep: Indicates that the entry is invalid, or out of normal operating range, and the Lineshare Pro did not accept the change. Re-enter the command string with a valid entry.

NOTE

All programming commands end with a * key.

5.2 Lineshare Pro Features

Tables 5-1and 5-2list the Lineshare Pro’s capabilities, factory settings, and available options. The sections that follow Tables 5-1and 5-2explain the features and functions n detail and provide guidelines for changing the program settings.

Enter the programming mode by pressing # *.

Press 0 in front of a feature number to turn the feature OFF.

Press 1 in front of a feature number to turn the feature ON.

Exit the programming mode by pressing * *.

34