Chapter 4: On-Screen Display
VIDEO (continued) | CROPPING | Crop the display of video sources |
| BRIGHTNESS | Set brightness of analog input signal |
| CONTRAST | Set contrast of analog input signal |
| HORIZ POSITION | Horizontal screen position |
| VERT POSITION | Vertical screen position |
| SCREEN WIDTH | Set screen width of analog input signal |
| PHASE | Adjust phase of analog input signal |
| FORMAT | Fit input format to screen |
COMPUTER | CHANNEL MAPPING | Assign an input port to a channel |
| AUDIO | Enable audio output/Audio source selection/Volume |
| NAME | Assign computer names |
| KEYBOARD | Display type of keyboard (PC1, PC2, PC3, or USB) |
| MOUSE | Display type of mouse (PS/2, PS/2 Wheel, or USB) |
|
| Set USB mouse positioning (absolute/relative) |
| RESET PS/2 | Reset PS/2 mouse and keyboard |
| EDID/DDC | Program input EDID |
USB DEVICE | USB PORT STATUS | Shows USB 2.0 matrix status and allows |
|
| USB ports to be assigned to a device |
HELP | ABOUT | Firmware / hardware version, serial number, etc |
| HOTKEY | List of keyboard commands |
| CONTACT | Contact information |
4.2 OSD—Main Menu Window
There are three ways to open the OSD main menu (Figure
1.Use a keyboard command: “hotkey“ + “O.” (letter “O”)
2.Simultaneously press
3.Remotely open the OSD via ConfDev program on an external PC with serial or USB connection.
Page 20 |
