Black Box KVP40004A manual Appendix A Keyboard Commands, Appendix A. Keyboard Commands, Page

Appendix A: Keyboard Commands

Appendix A. Keyboard Commands

ServSwitch 4site Flex supports two types of hotkeys: “multiple keys” and “double click.”

By default, ServSwitch 4site Flex is set to “multiple keys.”

Use the OSD menu to choose the hotkey type and keys.

Multiple keys: Press multiple keys plus command key.

COMMAND = <Hotkey> and <Command Key> together.

The following hotkeys are available for selection: Ctrl, Shift, Alt, and Win.

By Default: HOTKEY = <Ctrl> + <Alt>

Further examples:

<Hotkey> = <Ctrl> + <Win> + <Alt>

<Hotkey> = <Ctrl> + <Shift>

<Hotkey> = <Alt>

Double click key: Double click one key (=hotkey) and immediately press the command key within two seconds.

COMMAND = <Hotkey> and <Command key> in sequence

As a double-click hotkey you can choose one of the following keys:

<Ctrl> + <Shift> + <Alt> + <Scroll>

Examples:

<Hotkey> = <Scroll> <Scroll>

<Hotkey> = <Ctrl> <Ctrl>

NOTE: In command mode (hotkey is activated), LED flashes on the keyboard. In double-click hotkey mode, pressing an invalid key leaves the command mode. While OSD is open hotkey = <Ctrl>.

Selecting display mode:

<Hotkey> + <Q> = Quad mode

<Hotkey> + <F> = Full-Screen mode

<Hotkey> + <P> = PiP mode

<Hotkey> + <W> = Win mode

Selecting active channel in Full-Screen/Quad/PiP/Win mode:

<Hotkey> + <1> = Computer 1

<Hotkey> + <2> = Computer 2

<Hotkey> + <3> = Computer 3

<Hotkey> + <4> = Computer 4

You can also use hotkey and the arrow keys to switch the active channel. In Quad and Win mode, you can select the channel on the right using the 1, 2, 3, or 4 keys on the numeric keypad. Switch the active channel with hotkey and the arrow keys. In PiP mode, the active channel automatically is displayed as full image.

Page 86 724-746-5500 blackbox.com