Black Box KVP40004A, servswitch 4site flex Appendix C Update ServSwitch 4site Flex Firmware, Page

Appendix C: Update ServSwitch 4site Flex Firmware

Figure C-2. Update firmware screen.

2.Start the executable firmware file.

3.Set the desired COM port.

4.Press “Update.”

LEDs 1–4 on the front panel of the ServSwitch 4site Flex flash (blue) during the update. Additionally, the upgrade process is indicated by an OSD window on your remote computer.

Figure C-3. OSD update screen.

After successful update, ServSwitch 4site Flex restarts without changing configuration.

Page 94 724-746-5500 blackbox.com