Black Box servswitch 4site flex, KVP40004A manual OSD Mode Current

Chapter 5: OSD Mode

5. OSD Mode

5.1 Current

Defines the current mode in which the device should run.

Figure 5-1. Mode>Current mode screen.

Choose from Full-Screen, Quad, PiP, or Win Mode, or Test Pattern.

5.2 START

Sets the mode in which the device should boot.

Figure 5-2. Mode>Start mode screen.

This feature allows you to define the start configuration, i.e. the display mode (Full-Screen, Quad, PiP, or Win Mode, or Test Pattern), active channel, and PiP settings that ServSwitch 4site Flex uses after a reset or when the system is powered up.

When the START menu is called up, the current start configuration is displayed. To modify your start configuration, change parameters in the channel, mode, and PiP fields. Press ESC to save the new parameters and exit the START menu.

Choose “Use current mode” to adopt the current settings as start mode. Use arrow keys to navigate to “Use current mode” and confirm by pressing ENTER.

The factory default start mode is Quad-mode with active channel 1.

724-746-5500 blackbox.com Page 37