Black Box servswitch 4site flex, KVP40004A manual OSD Mode, Page, Single scan -10. Single scan mode

Chapter 5: OSD Mode

One channel is selected to be displayed as permanent full image (active channel).

Only the PiP can be switched. Press front-panel buttons 1, 2, 3, or 4 to switch the full image.

Single scan:

Figure 5-10. Single scan mode.

Within a PiP image, when the three other video sources are displayed one after the other, the delay can be set to between one and nine seconds.

Figure 5-11. PiP video sources displayed one after the other.

724-746-5500 blackbox.com Page 41