Chapter 4: On-Screen Display
SECURITY LEVEL 3
With Security Level 3, you can use the following additional settings in the OSD:
SYSTEM | OSD LANGUAGE |
VIDEO | BRIGHTNESS/CONTRAST/HORIZ POSITION/VERT POSITION |
| SCREEN WIDTH/PHASE |
USB DEVICE |
|
SECURITY LEVEL 2
With Security Level 2, you can use the following additional settings in the OSD:
SYSTEM | HOTKEY/HOTMOUSE/QUAD MODE |
CONSOLE | KEYBOARD/Touchscreen |
SECURITY LEVEL 1 | |
With Security Level 1, you have the following additional settings in the OSD:
SYSTEM | DISABLE CHANNEL |
CONSOLE | MULTIMONITOR/VIDEO OUTPUT |
VIDEO | DVI/VGA/ROTATION/CROPPING |
COMPUTER | CHANNEL MAPPING/MOUSE/RESET PS/2 |
• Switch video output to VGA (using hotkey “V” or front panel buttons 1+2)
SECURITY LEVEL 0
This is the default setting of ServSwitch 4site Flex. All settings are allowed and all functions are enabled.
4.4.9 Disable Channel
Navigate with the arrow keys in the SYSTEM menu to the entry DISABLE CHANNEL.
Press ENTER/SELECT to open the DISABLE CHANNEL window.
Figure 4-15. System>Disable Channel screen.
If two or three computers or video sources are connected to ServSwitch 4site Flex, use the DISABLE CHANNEL feature to ensure that for the unused channels:
a)message "no signal input x" is not shown in Quad mode
b)PiP images are not displayed on screen
c)these channels are not selectable in Full-Screen mode
Page 31 |
