Bosch Appliances D9412GV2 manual Using the Terminal Strip, Terminal Strip Connections

Caution - AC induction: Avoid installing Zonex data wires and Zonex input (sensor loop) wires around any AC conduit, wiring, or electrical devices that emit fields of electromagnetic interference (EMI).

D9412GV2/D7412GV2 Operation and Installation Guide 9.0 Off-Board Points

A D8128D OctoPOPIT can be installed up to 61 m (200 ft.) from the control panel.

2.Connect the D8128D to the control panel:

•Wire the D8128D to the terminal strip on the side of the POPEX Module (), or

•Connect the D8128D using the Molex® connectors (P1 and P2). Refer to Using Molex® Connectors on page 46.

Using the Terminal Strip

Refer to Table 17, Figure 16 on page 44, and Figure 17 on page 45 when using the terminal strip to connect the D8128D OctoPOPIT to the control panel.

Table 17: Terminal Strip Connections

	D8128D		D9412GV2		D7412GV2
Common			Terminal 23	Terminal 23
	Out		Zonex 1 = Terminal 27		Terminal 27
			Zonex 2 = Terminal 25
In		Zonex 1 = Terminal 28		Terminal 28
			Zonex 2 = Terminal 26
+12 V			Terminal 24	Terminal 24

Bosch Security Systems, Inc. 5/05 F01U003641B 43