Bosch Appliances D9412GV2 manual 5.2.2Installing the Battery

D9412GV2/D7412GV2 Operation and Installation Guide 5.0 Power Supply

5.2.2Installing the Battery

1.Place the battery upright in the base of the enclosure.

2.Locate the red and black leads supplied in the literature pack.

3.Connect the black battery lead to Terminal 4, and then to the negative (-) side of the battery.

4.Connect the red battery lead to Terminal 5, and then to the positive (+) side of the battery.

Warning: High current arcs are possible. The positive (red) battery lead and Terminal 5 can create high current arcs if shorted to other terminals or the enclosure. Use caution when working with the positive lead and Terminal 5. Always disconnect the positive (red) lead from the battery before removing it from Terminal 5.

Caution: The battery terminals and wire are not power limited. A 6.4 mm (0.250 in.) space must be maintained between the battery terminals, battery wiring, and all other wiring. Battery wiring cannot share the same conduit, conduit fittings, or conduit knock- outs with other wiring. Refer to Figure 5 on page 22.

Bosch Security Systems, Inc. 5/05 F01U003641B 21