Bosch Appliances D7412GV3 manual D8125 and D9127 Popit Modules, Off-Board Point Errors, Listings

D9412GV3/D7412GV3 Operation and Installation Guide 9.0 Off-Board Points

Table 12: Off-Board Point Errors

Error Condition	Result		Additional Information
+/- leg of the data expansion bus has a	Ground Fault event
short circuit to earth ground, with
Ground Fault Detect enabled
+/- leg of the data expansion bus is	All POPITs beyond the
disconnected	disconnection send Missing
	report
Data expansion bus has a short circuit	 All POPITs send Missing		When the data expansion bus restores, Pt
		report	Bus Restore event occurs. If any POPIT is
	 Pt Bus Trouble event		connected to the data expansion bus
			without an assigned Point Index, an Extra
			Point event occurs.
+/- leg of the data expansion bus has a	 All POPITs send Missing
short circuit to the Common terminal on		report
the control panel	 Pt Bus Trouble event
Terminal 26, 28, or 94 has a short	No Pt Bus Trouble event occurs
circuit to a Common terminal
Terminal 25, 27, or 94 has a short	 Pt Bus Trouble event
circuit to a Common terminal		Keypad displays:
		SERVC ZONEX 1
Terminals 27 and 28 have a short	 Pt Bus Trouble event
circuit together		Keypad displays:
		SERVC ZONEX 1

9.1.5D9412GV3/D7412GV3 Responses to Missing Point Conditions

The D9412GV3 and D7412GV3 respond to missing point conditions based on the point’s programming and the armed state of the point’s area. For example, if an interior motion detector point is missing during a disarmed state, a Missing Trouble event is generated; however, if the point is missing while the area is Master Armed, a Missing Alarm event is generated. Non-fire, 24-hour points always generate a Missing Alarm event, whereas Fire points always generate a Missing Fire Trouble event.

9.2D8125 and D9127 POPIT Modules

D9127 POPITs use the D8125 POPEX Module to report to the control panel. Each D8125 supports up to 119 POPIT points. Connect two D8125 Modules to the D9412GV3 to bring the combined total number of POPIT and on-board points to 246.

Points 9 to 127 connect to the first POPEX Module.

Points 129 to 247 connect to the second POPEX Module.

The D9412GV3 reserves Points 128 and 248 for internal use.

The control panel annunciates activity only for each POPIT, not for each detection device connected to the sensor loop.

The D9127 Module enclosures are made of UL Listed fire resistant material. D9127T Modules contain tamper switches. D9127U Modules include untampered covers. Unless the module is mounted in a tampered enclosure, UL requires D9127T Modules for certificated accounts.

Listings

The D8125 POPEX and the D9127 POPIT Modules are UL Listed for Local or Police Connected Burglar Alarm, Central Station Burglar Alarm, Household Burglar Alarm, Central Station Fire, Local Fire, Remote Station Fire, Household Fire, and Electrically Actuated Transmitter Applications.

Refer to the D9412GV3/D7412GV3 Approved Applications Compliance Guide (P/N: F01U143069) to determine the required equipment and enclosures for the application.

Bosch Security Systems, Inc. 10/10 F01U143070-03 37