D9412GV3/D7412GV3 Program Entry Guide 5.0 AUXPARM

EN 131

5.5Programming Path Numbers and IP Addresses for Enhanced Communications

Enhanced communications is the ability to communicate by some means other than the standard digital dialer. In this section, programmable parameters allow you to define up to four separate enhanced communication paths to which events can be routed. To route an event (such as an Alarm or Trouble) to an enhanced communication path, additional programming must also be completed in Section 2.3 Routing on page 17.

Enhanced Comm

Default:

No

Selection:

Yes or No

Yes

Enable enhanced communications

 

over the SDI bus.

No

Do not enable enhanced

 

communications over the SDI bus.

 

 

If using IP Addresses as the communication means for UL 864 Commercial Fire applications, set this parameter to Yes.

Determines if the control panel allows enhanced communications over the SDI bus.

Events can be routed to as many as four available enhanced communication paths through the SDI bus. If an event (or group of events) is routed to an SDI path, the number entered in Primary Device determines which SDI path is used (provided that RG# Prim, Primary SDI was set to Yes in Routing).

If events are to be routed to an IP address (in a private LAN or WAN application), determine which path is used (Path 1 to Path 4), and enter the appropriate IP Address for that path (refer to Path # IP Address on page 131).

If events are to be routed to an SDI Path but not to an IP Address, allow the setting for Path # IP Address to remain at 0. Path # Poll Rate, Path # Ack Wait, and Path # Retry Count must be programmed.

Keypad Programming to Enable or Disable Enhanced Comm

D1255

1.Refer to Figure 1 on page 7 to access Keypad Programming and navigate to the ENHANCED COMM option. Press [ENT].

2.The keypad shows the current setting by alternating between COMMUNICATIONS> and ENHANCED> YES or NO. To configure enhanced communications, press [ENT].

3.Press [NEXT] or [PREV] to toggle to YES to enable enhanced communication or No to disable enhanced communication, and then press [ENT].

When the keypad reads PARAMETER SAVED, your selection has been configured.

D1260

1.Refer to Figure 2 on page 8 to access Keypad Programming and navigate to the Enhanced Comm option. Press the Enhanced Comm softkey.

2.The current Enhanced Enabled configuration shows (for example, Enhanced Enabled: Yes).

3.Press the Edit softkey to change the configuration.

4.Press the Yes or No softkey, and then press the Save softkey to save the changes.

When the keypad reads Parameter Saved, your selection is configured.

Path # IP Address

Default:

 

0.0.0.0

Selection:

0.0.0.0 to 255.255.255.255

0 to

There are four numbers in a valid IP

255

address. Leading zeros are not required.

 

 

 

If using IP Addresses as the communication means for UL 864 Commercial Fire applications, set Path

#IP Address as necessary.

Path # IP Address contains the IP addresses for each of the four enhanced communication paths available.

An IP address has four fields. Each field has a range of 0 to 255. For example, an IP address is expressed as 110.227.64.190. Contact your network administrator to obtain the appropriate IP Address to contact a central station receiver.

Refer to Keypad Programming of Path # IP Address, Path # Port Number, and Path # Poll Rate on page 132.

Path # Port Number

Default: 7700

Selection: 1 to 65535

This prompt specifies the destinaton port number for each of the four enhanced communication route path destinations.

Whenever an IP address or port number configured in the control panel is changed, the central station must resynchronize the control panel’s anti-replay/anti-substitution static key.

Bosch Security Systems, Inc. 10/11 F01U170807-02

Page 130 Page 132
Page 131
Image 131
Bosch Appliances D9412GV3 manual Enhanced Comm, Path # IP Address, Path # Port Number
Page 130 Page 132

D9412GV3 specifications

The Bosch Appliances D9412GV3 is a perfect blend of functionality and innovation, designed to meet the needs of modern households. This dishwasher is part of Bosch's reputation for creating high-quality, energy-efficient home appliances. With a sleek design and advanced technology, the D9412GV3 stands out in the crowded market of dishwashers.

One of the main features of the D9412GV3 is its remarkable efficiency. With an Energy Star rating, this model is designed to minimize water and energy consumption while still delivering exceptional cleaning performance. The EcoSense technology optimizes water usage, ensuring every wash cycle is both effective and economical, making it a responsible choice for energy-conscious consumers.

The dishwasher offers a spacious interior, capable of accommodating large loads. Its flexible rack system includes adjustable tines and folding platforms, making it easy to fit various dish sizes, from pots and pans to delicate glassware. Additionally, the third rack feature provides extra space for utensils and smaller items, enhancing its capacity and versatility.

In terms of cleaning power, the D9412GV3 is equipped with the PrecisionWash system. This cutting-edge technology features intelligent sensors that continuously scan and check the load, adjusting the wash cycle as needed for optimal results. Coupled with the 40 dBA noise level, it ensures that the dishwasher operates quietly in the background, so you can enjoy your home without disruptive sounds.

Another standout characteristic is the PureDry technology, an integrated drying system that uses a condensation process to gently dry dishes without the need for extra heat. This not only protects sensitive items but also saves energy, further enhancing the appliance's eco-friendly nature.

Ease of use is a priority for Bosch, as seen in the D9412GV3's user-friendly controls. The intuitive interface allows for selecting various wash cycles and options, including Heavy, Auto, and Quick options, catering to different cleaning needs. Additionally, the Time Delay feature provides the flexibility to set the dishwasher to run at a later time, great for aligning with your schedule.

In summary, the Bosch D9412GV3 combines innovative technologies with a user-centered design to deliver a top-tier dishwasher experience. Its energy-efficient operation, spacious interior, and advanced cleaning features make it an excellent choice for any kitchen, ensuring spotless dishes with minimal effort. With Bosch's commitment to quality, the D9412GV3 stands as a reliable and stylish addition to any modern home.
Top Page Image Contents