Bosch Appliances D9412GV3 manual ## Disarm Level, ## Function Level

D9412GV3/D7412GV3 Program Entry Guide 2.0 Panel and Area Wide Parameters

EN 76

L## Disarm Level

Default:	Refer to the program record sheet
Selection:	I, D, or -
I	Users change the Master Armed
	state and Perimeter Armed state to
	Perimeter Instant. The armed state
	does not change in other areas, and
	the armed state does not change if
	the area is already in the perimeter
	instant or disarmed state. User
	needs access level for Master
	Armed (M) state.
D	Users change the local area’s
	Master Armed state and Perimeter
	Armed state to the Disarm state.
	User needs access level for Master
	Armed (M) or Perimeter Armed (P)
	state. All areas within the scope of
	the keypad assigned to the D# CC#
	Scope in the access handler, and
	areas to which the user has disarm
	rights, disarm as programmed.
-	Users do not have disarm rights in
	this area.

Burglar bells are silenced in the local area when a user disarms with a token or card or presents the token or card during an alarm. The user must use a passcode to silence a Fire Bell. Cancel Reports are sent after a valid passcode or token or card silences the bell.

Opening and Closing Reports are sent to the central station receiver if programmed.

For more information on programming this prompt for a shared area, refer to Access Control Readers Assigned to the Shared Area in Section 2.8.2 Shared- Area Characteristics on page 41.

L## Function Level

Default:	Refer to the program record sheet
Selection:	M, D, C, or -

MActivate the custom function assigned to the door in this area while the area is Master Armed or Disarmed only.

DActivate the custom function assigned to the door in this area while the area is Disarmed only.

CUser can activate the custom function assigned to the door in this area while the area is Master Armed, Perimeter Armed or Disarmed.

-User cannot activate the custom function assigned to the door in this area.

When a token or card can also disarm an area, the custom function starts after the area disarms.

A user does not require L## Security Level or L## Disarm Level authority to activate a custom function with a token or card.

Tokens or cards that are used to execute Custom Functions must have a passcode assigned to the corresponding User###.

Bosch Security Systems, Inc. 10/11 F01U170807-02