desired, a few extra camera number lines in the table may be reserved at this time for future expansion. If a local title is specified, the camera's title can also be entered at this time. Designate any local camera numbers appropriately, and enter their cor- responding titles.
| Figure 8: Main Site Sample Program Showing Local Cameras, Trunk Lines and Remote Cameras |
NOTE | Either a local camera, or a remote camera programmed with a local title, will |
| need to be selected to view certain |
| ming of the main site via a system keyboard. |
| Once the system is programmed and configured, any unused monitor outputs |
| located at the main site should be selected to display a local camera via the system |
| keyboard. This prevents unused monitor outputs from using up trunk lines which |
| may result in some confusing operational responses. |
| The |
| software should be programmed to specify locally connected cameras or a local |
| unused input (i.e., the raster generator will be displayed when called up). This table |
| defines the camera numbers that will automatically be switched to an operator's |
| monitor in the event the trunk line being used to display their original satellite cam- |
| era is 'stolen' by an operator with a higher priority. |
Figure 9: Main Site Sample Program Showing Monitor Start-Up Camera Numbers
EN 24 | Bosch Security Systems December 13, 2005 |
