System Status Display
If this display is selected (factory default), it allows the Allegiant system to dynami- cally inform the user of the system status. The
•if the switcher is running or stopped
•the switcher’s direction
•if a monitor or remote camera is locked
•the alarm status of the camera and monitor
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
A | A | A | M | C | E | R | M | A | S | S | S |
l | l | l | o | a | r | e | o | b | e | e | e |
a | a | a | n | m | r | m | n | s | q | q | q |
r | r | r |
|
| o |
|
| / |
|
|
|
m | m | m | A | A | r | L | L | R | N | N | S |
|
|
| r | r | / | o | o | e | u | u | t |
|
|
| m | m | D | c | c | l | m | m | a |
|
|
|
|
| l | k | k |
|
|
|
|
|
|
|
|
| R |
|
|
|
|
|
|
|
|
|
|
| !" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Format of Monitor Overlay's System Status Display
•Locations 1, 2, and 3 - Alarm Indication
When the monitor overlay is in the status display mode, locations 1 through 3 indicate if a camera on the monitor is in the alarm mode. If the
•Location 4 - Monitor Arm Status Indication
In the MONITOR ARMED location, the characters SM or DM will appear if the monitor is armed for alarm. SM means that the monitor is a “step” or “sequence” monitor, and will automatically step through multiple alarm videos. DM indicates that the monitor is a “display” or “review” monitor, which will collect alarm vid- eos from one or more step monitors.
When an alarm occurs, the alarmed camera's video will replace the current dis- play of the monitor. If the monitor is not armed, this location will be blank.
•Location 5 - Camera Arm Status Indication
In the CAMERA ARMED location characters CA are displayed if the camera being viewed is armed for alarm on that monitor. If the alarm signal associated with this camera becomes active, the camera will be displayed on the appropri- ate armed monitors.
EN 30 | Bosch Security Systems December 13, 2005 |
