CPU Software Version Numbers
Allegiant Satellite Concepts
Allegiant
Master
Allegiant |
| Allegiant |
| Satellite | |
Satellite |
| |
|
| |
|
| Satellite can view / |
|
| control only local |
Allegiant | Allegiant | cameras |
| ||
Satellite | Satellite |
|
Typical Master / Multiple Satellite Configuration
|
| Both |
|
| Masters can |
Allegiant | Allegiant | view / |
Master | Master | control all |
|
| cameras |
| Dual Master Configuration |
|
Allegiant | Allegiant |
Master | Master |
All Masters can view / control all cameras
| Allegiant |
| Allegiant |
| |
| Master |
| Master |
| |
|
| Quadruple Master Configuration |
|
| |
|
|
|
| Satellite | |
Master can view |
|
|
| can view / | |
/ control all |
| Allegiant |
| control | |
cameras | Allegiant | Allegiant | only local | ||
Satellite / | |||||
| Master | Satellite | cameras | ||
| Master | ||||
|
|
|
|
Satellite / Master can view / control local and Satellite’s cameras
‘Cascaded’ Satellite Configuration
Figure 16: Possible Allegiant Satellite System Configurations
Any Allegiant Series switcher model (LTC 8100, LTC 8200, LTC 8300, LTC 8500, LTC 8600, LTC 8800, or LTC 8900) can be used as a main site or a satellite site unit. All products are standard models, and the only special requirement is to use either the optional LTC 8059/00 MCS or the optional LTC 8850/00 GUI Software pack- age for initial programming of each Allegiant system.
An Allegiant biphase control data line from the code distribution unit at the Main site must be provided to each satellite site. This data line carries all pan/tilt/zoom control commands, in addition to the switching commands generated by the Main
EN 79
