Bosch Power Tools CM8S manual Operating Sliding fence, Removing Sliding fences

BM 2610025580 05-13_BM CM8S 5/17/13 1:37 PM Page 26

preparing for Saw Operations

Workpiece Support

Sliding fence

To provide sufficient (minimum ! WARNING 6") spacing from hand to saw

blade, extend the sliding fence and sliding base extensions when making extreme bevel, miter or compound cuts, figure 31.

Operating Sliding fence

1.Loosen the fence lock knob counter clockwise ½ turn to loosen fence (see figure 32).

2.Slide fence to the desired position.

3.Tighten the lock knob clockwise to lock fence position.

Removing Sliding fences

The sliding fence may need to be removed when preforming extreme bevel cuts and most compound cuts.

1.Loosen the fence lock knob counter clockwise 4 rotations, see figure 32.

2.Lift and remove fence.

FIG. 31

Sliding

fence

FIG. 32

Sliding

fence fence lock

Knob

26.