![](/images/new-backgrounds/1302298/30229819x1.webp)
BM 2610025580
Assembly
Unpacking and Checking Contents
Unpacking the Miter Saw – When removing this tool from packaging materials, reach down to the two side
To avoid severe pinching, never ! WARNING lift or move this saw by gripping
any component of the mechanism support system.
Checking Contents in package – Open the top of the package and look for the included loose parts. Refer to the diagram below.
To avoid possible injury, always ! WARNING disconnect plug from power
source before performing any assembly, adjustments or repairs.
Loose Parts - 1 of each shown | Check off for each part |
Workpiece Clamp
Dust Bag
Auxiliary Clamp Hole
Screws for Auxiliary Clamp Hole
Manual
Operating/Safety Instructions
5mm Hex Key
10.