English
Español
Français
Controls and Capabilities
Component video or progressive scan: activating your selection
If you have used a component video connection between the media center and the TV, you need to make the activation settings as explained below.
With the media center turned off, use the controls on its front panel to follow these steps:
1.Press and hold the Enter button on the media center.
2.While holding the Enter button down, press the Store button.
Selections will appear on the media center display each time you press Store.
3.When Video appears as the selection on the display, release the Store and Enter buttons.
4.Use the Volume up and down buttons to scroll through the Video options.
5.Stop scrolling at the proper selection.
•For a component connection only, select:
•For a component connection and progressive scan, select NTSC PROGRESSIVE.
Note: The system does not support PAL Progressive video.
6.With the proper selection made, press Store to confirm the selection and leave the Video options.
The system is now ready to deliver the video signal you prefer.
16
