Scan to File

When you select Scan to File you can scan a black and white or color original and send it directly to a PC you designate on your network. The file will be saved in the folder and file format that you have configured in the Brother SmartUI on the designated PC. You can change the Scan configuration.

(For Windows® 98/Me/2000: See Scan to File on page 9-8to 9-9.)

(For Windows® XP: See Hardware Section: Changing the Scan to button configuration on page 10-5to 10-11.)

For Network Scanning the Brother Control Center (SmartUI) selections are used only for configuring the Scan button. You will not be able to initiate a Network scan from the Brother Control Center (SmartUI).

1 Place the original face up in the ADF, or face down on the scanner glass.

2

Press Scan.

 

 

 

 

3

Press

or

to select Scan

▲Scan to E-mail

 

to File.

 

 

Scan

to

Image

 

 

 

 

Scan

to

OCR

Press Set.

▼Scan to File

 

4 Press or to select a destination you want to send. Press Set.

If the LCD prompts you to enter a PIN Number, enter the 4-digit PIN Number for the destination PC on the control panel. Press Set.

The DCP will start the scanning process.

Max. 25 clients can be connected to one DCP on a Network. For example, if 30 clients are connect at a time, 5 clients will not be shown on the LCD.

NETWORK SCANNING (WINDOWS® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 12 - 8