4
5
Enter your password using the | Secure Print | ||
numeric keys. |
| Test1 | |
Press Set. |
|
| Password:XXXX |
|
|
| |
Press | or | to select | Enter & Set Key |
Print.
Press Set. The DCP prints the data.
If you want to delete the secured data press 
or 
to select Delete.
Press Stop/Exit.
■If you turn the power switch off, the secured data saved in memory will be cleared.
■After you print the secured data, it will be cleared from memory.
Setting the Emulation Selection
This DCP has an Automatic Emulation Selection function. When the DCP receives information from the PC, it automatically chooses the emulation mode. This function has been set at the factory to AUTO.
You can change the default emulation mode manually by using the control panel.
1 | Press Menu, 3, 1. |
| 31.Emulation | ||
2 | Press | or | to select Auto, | ▲ | Auto |
| HP LaserJet | ||||
| HP LaserJet or |
| |||
| ▼ | ||||
| Press Set. |
|
| ||
|
|
| Select ▲▼ & Set | ||
3 Press Stop/Exit.
■Try this function with your application software or network server. If the function does not work properly, either select the required emulation mode manually using the DCP panel buttons or use the emulation selection commands in your software.
■After you print the secured data it will be cleared from the memory.
6 - 17 USING THE DCP AS A PRINTER