Release Lever
Make sure that the paper is straight and in the proper position on the MP tray. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam.
5 While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
When you put paper in the MP tray, please remember the following:
Pull out the MP tray support flap.
Open the MP tray and lower it gently.
2
3
4 When loading paper in the MP tray, make sure it touches the back of the tray.
Media Type: Plain Paper
Paper Source: MP Tray
Paper Source, and other
1 Select the Paper Size, Media Type, settings in the printer driver.
The MP tray (For DCP-8025D)
The DCP automatically turns on the MP Tray mode when you put paper in the multi-purpose tray.
■The side to be printed on must be face up.
■During printing, the inside tray rises to feed paper into the DCP.
■Put the leading edge (top of the paper) in first and push it gently into the tray.
6 Send the print data to the DCP.
USING THE DCP AS A PRINTER 6 - 6