USING THE DCP AS A PRINTER
6 - 5
Printing on plain paper
The manual feed tray (For DCP-8020)
The DCP automatically turns on the Manual Feed mode when you put paper in the manual feed tray.
1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver.
Media Type: Plain Paper
Paper Source: Manual
2 Send the print data to the DCP.
3 Open the manual feed tray. Slide the paper guides to fit the paper size.
4 Using both hands put paper in the manual feed tray until the front edge of the paper touches the paper feed roller and the DCP grips the paper.
■ Make sure that the paper is straight and in the proper position on the manual feed tray. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam.
■ Do not put more than one piece of paper in the manual feed tray at any one time, or it may cause a jam.
5 After the printed page comes out of the DCP, put in the next sheet of paper as in Step 4 above. Repeat for each page that you want to print.