Link/Speed LED is green: 10 BASE T Ethernet

This Link/Speed LED will be green if the print server is connected to a 10 BASE T Ethernet.

Active LED is yellow:

The Active LED will blink if the print server is receiving or transmitting data.

If there is a valid connection to the network, the LED will blink orange or green.

TEST SWITCH

Short push: Prints the network configuration page.

Long push (more than 5 seconds): Reset the network configuration back to the default settings.

Test

Switch

LED

Ethernet

RJ-45

LED

To set up the DCP on the Network, see the NC-9100h Network User’s Guide on the CD-ROM.

OPTIONAL ACCESSORIES 15 - 10