Status LED indications
The Status LED (Light Emitting Diode) will flash and change color depending on the DCP status.
The LED indications shown in the table below are used in the illustrations in this chapter.
LED |
| LED status |
|
| LED is off. |
|
| LED is on. |
Green | Yellow | Red |
|
| LED is blinking. |
Green | Yellow | Red |
LED | DCP status | Description |
|
|
|
| Sleep Mode | The power switch is off or the DCP is in Sleep |
|
| mode or Power save mode. |
|
|
|
| Warming Up | The DCP is warming up for printing. |
Green |
|
|
|
|
|
| Ready | The DCP is ready to print. |
Green |
|
|
|
|
|
| Receiving Data | The DCP is either receiving data from the |
|
| computer, processing data in memory or |
Yellow |
| printing data. |
|
| |
|
|
|
| Data Remaining in | Print data remains in the DCP memory. |
Yellow | Memory |
|
|
| |
|
|
|
1 - 8 INTRODUCTION