Brother DCP8020 manual 50

Press the Menu numbers.

(ex. Press 1, 1 for Paper Type)

—OR—

			to
to select	to select	to accept	exit

If you installed optional LAN board (NC-9100h), the LCD shows the following LAN menu. (See the Network User’s Guide on the CD-ROM.)

Main Menu	Submenu	Menu	Options	Descriptions	Page
		Selections
4.LAN	1.Setup	1.BOOT Method	Auto	You can choose the
(option)	TCP/IP		Static	BOOT method that
			RARP	best suits you needs.
			BOOTP
			DHCP
		2.IP Address	[000-255].	Enter the IP address.
			[000-255].
			[000-255].
			[000-255]
		3.Subnet Mask	[000-255].	Enter the Subnet
			[000-255].	mask.
			[000-255].
			[000-255]
		4.Gateway	[000-255].	Enter the Gateway
			[000-255].	address.	See
			[000-255].		Network
			[000-255]		User’s
					Guide
		5.Host Name	BRN_XXXXXX	Enter the Host name.
					onthe
		6.WINS Config	Auto	You can choose the	CD-ROM.
			Static	WINS configuration
				mode.
		7.WINS	Primary	Specifies the IP
		Server	Secondary	address of the
				primary or secondary
				server.
		8.DNS Server	Primary	Specifies the IP
			Secondary	address of the
				primary or secondary
				server.
		9.APIPA	On	Automatically
			Off	allocates the IP
				address from the
				link-local address
				range.

The factory settings are shown in Bold with .

3 - 7 ON-SCREEN PROGRAMMING